paper-faqs
Products
Paper FAQs
| WHAT IS BASIS WEIGHT (GRAMMAGE)? | The Basis weight of paper is the weight per unit area. This can be expressed as the weight in grams per square metre (Gsm or g/m2) or pounds per 1000 squares ft. |
| WHAT IS TEMPERATURE & HUMIDITY : CONDITIONING OF PAPER? | Paper is hygroscopic in nature i.e. they are capable of absorbing water from the surrounding atmosphere. The amount of absorbed water depends on the humidity and the temperature of the air in contact with the paper. Hence, changes in temperature and humidity, even slight changes, can often affect the test results. So, it is necessary to maintain standard conditions of humidity and temperature for conditioning. |
| WHAT IS SIZING/COBB? | Resistance towards the penetration of aqueous solution/water is measured by sizing or cobb values. The cobb size tester measures the weight, in grams, of water absorbed in a given length of time, normally one minute (GSM/minute). |
| WHAT IS FORMATION? | Formation is an indicator of how the fibers and fillers were distributed in the sheet. |
| WHAT IS BULK? | Bulk is the volume of the paper per unit weight and is expressed as cc/gm. It is the reciprocal of density (weight per unit volume). It is calculated from caliper and basis weight. |
Bulk = caliper in microns/Basis weight in GSM. | |
| WHAT IS STIFFNESS? | Stiffness is the measure of force required to bend a paper through a specified angle. |
| WHAT IS FOLDING ENDURANCE ( DOUBLE FOLDS)? | Folding endurance is the paper's capability of withstanding multiple folds before it breaks. Fold test is also used as an indicator for aging properties of paper as it is a sensitive measure of influence tending to degrade fiber. |
| WHAT IS TEARING RESISTANCE? | It is the amount of work done in tearing the paper through a fixed distance after an initial out. Tearing resistance is more in cross direction than machine director. |
| WHAT IS BURST STRENGTH/BURST FACTOR/BURST INDEX? | The Bursting strength is the resistance to puncture by a blunt object. The results are reported in pounds per square inch or kgs. Per square centimeter or kilo pascals required to take the sample to rupture. Bursting strength indicates a composite of strength and toughness. Hence it is useful in testing for bag, wrapping papers and box boards where the paper is subjected to a stress similar to that exerted in the bursting tests. Burst factor/burst Index are the terms used to indicate the strength of the paper irrespective of the basis weight of the sheet i.e. ratio of bursting strength in gms/cm2 or K. Pa to GSM. Burst Index : Bursting Strength in K.Pa/ GSM. |
| WHAT IS TEARING STRENGTH/TEAR FACTOR/TEAR INDEX? | Tear is the determination of the average gram force/milli Newton required to tear a single sheet of paper through a specified distance after an initial tear has been introduced. |
| WHAT IS TENSILE STRENGTH/BREAKING LENGTH/TENSILE INDEX? | Tensile strength is a measure of the force per unit width required to break a specimen in either the machine or cross machine direction. It is the strength (load) in Kgs. that a paper strip of 15mm in width and 180mm in length can withstand before it breaks. Tensile strength is more in MD than CD. |
| WHAT IS CRUSH TEST? | The crust test is used to determine the compression strength of a material. The crush test also detects poor adhesive penetration, spotty adhesion and carton board with low board strength. |
| WHAT IS SIZING? | The addition of material either to the stock (internal sizing) or to the surface or to the surface of a paper or board (surface sizing), generally in order to increase its surface strength and its resistance to the penetration and spreading of aqueous liquids, for example writing ink. |
| WHAT IS CALENDRING? | Operation carried out by means of a calendar on the at least partially dried paper or board, with the aim of improving the finish. |
| WHAT IS MACHINE DECKLE? | The Overall width of the wet web as it leaves the forming zone. It indicates total width of paper coming out of paper machine. |
| WHAT IS TWO-LAYER PAPER OR BOARD? | Paper or board consisting of two furnish layers combined together during manufacture, while still moist, without the use of adhesive. |
| WHAT IS MACHINE-FINISHED (M.F.) PAPER OR BOARD? | Paper or board treated mechanically on the making machine to improve the smoothness and uniformity of appearance on both sides. |
| WHAT IS MACHINE-GLAZED (M.G.) PAPER OR BOARD? | Paper or board which has had one side made smooth and glossy by drying in contact with a heated, polished metal cylinder which forms part of the drying section of the machine. The other ide of the paper or board remains relatively rough. |
| SUM USEFUL CALCULATION |
|
| WHAT IS GRAIN? | Paper has a definite grain direction due to greater orientation of fibers in the direction of travel of the paper machine. This grain direction is known as machine direction. The cross direction is the direction of paper at right angles to the machine direction. |
| WHAT IS LONG GRAIN AND SHORT GRAIN? | The sheet is in long grain if the larger dimension is parallel to grain (MD) direction. The sheet is said to be in short grain if the larger dimension is parallel to cross direction (CD). DETERMINATION OF GRAM DIRECTION OF THE SHEET EXAMPLE |
| WHAT IS LINER PAPERS? | They are usually referred to as the "inner" liner which faces the package contents and the "outer" liner which is exposed to the surrounding environment with the fluting sandwiched in between. |
| WHAT IS KRAFT LINER ? | Kraft liner is made with mainly virgin fibre.The percentage of virgin to recycled material will vary between paper manufacturers, but generally, one would consider a Kraft liner to be one with at least 55 % virgin material. This paper will consist of mainly long fibres.The long fibres will give the board rigidity and strength, while the shorter fibre will give the paper a smoother surface for printability. |
| WHAT IS TEST LINER ? | Test Liner is usually made entirely of recycled fibre and is usually weaker than Kraft Liner. Recycled paper, however, is significantly cheaper than Kraft Liner– making it a cost effective choice for most corrugated cartons. |
| WHAT IS MULTI - LAYERED LINERS ? | Recent developments in papermaking technology have given manufacturers the ability to form the paper in layers, each with it is own characteristics of strength, moisture resistance, smoothness and colour. |
| WHAT IS WHITE LINER ? | White liner is a multi layered paper that has a white outer facing made of bleached paper fibres.The base paper onto which the white layer is laid may be either Kraft or Test liner leading to their naming as White Top Test Liner(WTTL) and White Top Kraft Liner(WTKL). |
| WHAT IS FLUTING PAPER ? WHAT IS MEDIUM(FLUTING) PAPERS ? | The fluting(or medium) in corrugated board is the wavy paper between the liners.Its“ wavy� shape provides high compression resistance and strength characteristics to the corrugated board– making it the secret ingredient in the strength corrugated board. While liners generally have higher strength and moisture resistance, fluting has to be more pliable so that they can be formed into the characteristic wave shape.At the same time, however, the fluting cannot be too absorbent– otherwise it will soften and fail under humid conditions. |
| WHAT IS HIGH PERFORMANCE FLUTING PAPER ? | High performance fluting is a relatively new development.These papers have been specifically manufactured to provide increased compression strength, reduced moisture absorption and consistent performance.Like high performance liners, the purpose of high performance fluting is to reduce the weight of packaging, without negatively impacting its strength. |
| WHAT IS SEMI - CHEMICAL FLUTING PAPER ? | Semi - chemical fluting is used where hygienic considerations prohibit contact of the packaged goods with possible contaminants in recycled paper.This applies in packages which are in direct contact with products like food or other sensitive. |